Search
Request quote

   Products

BRI-3304N Mandrel Free Return Loss And Insertion Loss Tester
    Publish time 2017-02-21 10:49    
BRI-3304N Mandrel Free Return Loss And Insertion Loss Tester

BRI3304N Mandrel Free Return Loss And Insertion Loss Tester is newly developed real “Mandrel Free” equipment. It will test the
return loss and insertion loss of optical components without winding or needing matching gel. It greatly increases the test efficiency
of the optical components and also provides a good solution for the components, which is not acceptable with traditional winding technique.

BRI3304N has USB/RS232 port and PC software, which fully integrate the accurate test and high efficiency data sampling.

Features

  • Mandrel Free  and no matching gel
  • Automatically IL&RL test

  • Simultaneously display of IL&RL

  • Multi-working mode including OPM, IL, RL, ILRL, IL2 and ILRL2

  • High precision OPM test mode, measurement range -75~+5dBm

  • USB or RS232 port

  • Up to 30 users self-defined calibration wavelength

Specification

Model

BRI-3304N

Optical Power Meter

Wavelength (nm)

800~1700

Detector1

InGaAs

Detector Square (mm)2

Φ2.0

Measurement Range (dBm)

-75~+5dBm

Linearity (dB)3

±0.04 (-55~+5dBm)

±0.08 (-55~-65dBm)

±0.2 (-65~-75dBm)

Applicable Fiber

SM/MM (fiber core diameter<62.5um)

Total Uncertainty4

±5%

Total Noise5

<10pW

Unit

dBm/dB

Optical Light Source

 

Wavelength (nm)6

1310/1550

Emitter

DFB Laser

Output Power (dBm)

>0

Connector7

FC/APC

Stability@15min(dB)

0.01

Stability@8 hours(dB)

0.03

Return Loss

Emitter8

Pulsed FP Laser

Measurement Range (dB)

-75~+12

Accuracy

±1(-60~-14dB)

Mother Patchcord (m)9

2~10

Min Length (m)10

2(APC endface)/3(PC endface)

Max Length (m)

1000

General Information

 

Power Supply (v)

180~260 AC 50Hz

Warm-up Time (mins)

5~15

Communication Port

USB & RS232

Operating Temperature (℃)

-10~+40

Storage Temperature(℃)

-15~+70

Weight (kg)

5

Dimension (mm)

235x380x96


Remark:

1: The default detector is InGaAs.

2: The detector square is 2mm. Different size is available upon the request.

3: Linearity is tested under 20~25℃ indoor temperature.

4: Total uncertainty is repeatedly tested under 20~25 ℃ indoor temperature and measurement range -65~+5dBm.

5: Total noise is tested under no signal input situation.

6: The default wavelength is 1310/1550nm. Other wavelength is also available upon your request.

7: Please be careful with the connector port and make it clean when in use.

   Please avoid to repeated pull in or out to ensure the test accuracy.

8: It adopts high intensity pulse source when test return loss. Please do not look into it directly. It may cause serious damage to eyes.

9: The recommend under test fiber length is 2~10m.

10: It is a length requirement for the under-test patchcord. If the under-test patchcord end-face is APC, the Min length is 2m;

      If the end-face is PC,t he Min length is 3m.

11: Warming up time is 15mins to ensure each optical component is under stable working condition.