FI6604 Optical Fiber Identifier is an
important tool for optical maintenance, which is used for nondestructive fiber
identification work, can be detected in any location of both SM and MM fiber.
Meanwhile when working together with
FI6604G Optical Signal Generator, they could realize low-frequency signal
online injection, and then identify a particular online fiber without injecting
of modulation signal.
This tester provides a good solution for Network Operating Center, which is full with complicated patchcords and cables.
Relative core power display
Specifications
Model |
FI6604 & FI6604G |
|
Identified Wavelength Range(nm) |
800~1700 |
|
Detector Type |
InGaAs (1000um) |
|
Adapter Type |
Ø0.25/Ø0.9/Ø2.0/Ø3.0 |
|
Identified Signal Type(Hz) |
CW,270,1K,2K |
|
Signal Direction |
Left & Right LED |
|
Signal Direction Test Range (dBm, CW/3mm fiber) |
-20~+10 (1310nm) |
|
-30~+10 (1550nm) |
||
Signal Power Test Range (dBm, CW/3mm bare fiber) |
-30~+10 |
|
Signal Frequency Display (Hz) |
270,1K,2K |
|
Frequency Test Range (dBm, Average Value) |
Φ0.9,Φ2.0 |
-30~0 |
-25~0 |
||
Φ3.0
|
270Hz,1KHz |
|
2KHz |
||
Typical Insertion Loss (dBm) |
0.8 (1310nm) |
|
2.5 (1550nm) |
||
Battery Capacity |
Two Tone LED Indicator |
|
Weight (without batteries) |
<210g |
|
FI6604G Signal Meter |
||
Generated Signal Types |
1Hz low-frequency signal |
|
Generated Signal Mode |
Mechanical vibration |
|
Insertion Loss |
<1dB(1310nm) |
|
Fiber Outer Diameter |
0.9/2/3 |
|
Weight (Without Batteries) |
<230g |
|
Alkaline Battery(V) |
9V |
|
Operating Temperature(℃) |
0~+50 |
|
Storage Temperature(℃) |
-10~+70 |
|
Dimension (mm) |
209*33*31 |